https://www.facebook.com/wilitasrilanka/videos/477511646335604/
FOAMING ENGINE DEGREASER
Features:
- New foaming and self-emulsifying formulation cuts through the most stubborn grease and residue.
- Instantly cleans the engine surface.
- Also good for removing tar and oil from painted surfaces.
- Will not harm the metal, rubber and plastic parts.
- Leaves only a protective film, no residue or grease.
Product Description:
ENVIRONMENTAL RESPONSIILITY:
- Low VOC formula and ozone friendly.
- Consult your local air quality regulations.
APPLICATION:
Wait treatment surface until warm, not hot. Cover all water-sensitive areas and apply a liberal amount of degreaser to the treatment area. Wait 5 minutes to let the engine soak, filthy, dirty deposits melt. Rinse and leave a clean, presentable engine compartment. Use a soft brush or cloth to help remove the excess dirt from off-road driving or other sources.
OTHER USES:
Motorcycles, bike and other non-electric powered vehicles.
Anywhere heavy grease accumulates, such as bike, motorcycle chain and filthy firewalls and concrete driveways.
USE ONLY AS DIRECTED:
Flammable liquid and vapor. Contents under pressure may cause flash fire, eye irritant. Use only in well-ventilated area. Do not breathe the spray. Over-exposure may cause respiratory tract irritation. Harmful if swallowed. Protect from sunlight and store at temperature below 120°F (49°C). Do not spray on open flames or any incandescent material. Do not puncture or incinerate even after use. Dispose properly in accordance with all national and local regulations. Can not be made non-poisonous.
SKIN CONTACT:
Flush skin with plenty of water.
EYE CONTACT:
Immediately flush eyes with plenty of water for 15 minutes. Seek medical attention if irritation persists.
DO NOT SWALLOW.
KEEP OUT OF REACH OF CHILDREN.
EXPIRY DATE:
5 years from manufactured.
Additional product safety and health information source, please see Material Safety Data Sheet (MSDS), or contact.
